2020 Chevrolet Traverse Check Engine Light

2020 Chevrolet Traverse Check Engine Light

If the check engine light in your 2020 Chevrolet Traverse starts flashing, that means that the problem needs attention promptly and your Chevrolet should be brought in rapidly. A flashing light reveals that the problem is remarkably serious and if not taken care of promptly may result in major and serious damage to the vehicle. This blinking light ordinarily reveals a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is likely, requiring an pricey and far-reaching repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A broken, old or dirty spark plug can cause the engine to misfire. If the problem is entirely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a tremendously costly repair. If your check engine light is regularly flashing, please contact our team of automotive experts at Coggin Chevrolet at the Avenues expeditiously by calling 9045745317.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2020 Chevrolet Traverse is the check engine light. The check engine light is part of the crucial onboard diagnostics system, and displays in an assortment of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do an assortment of things for your 2020 Chevrolet Traverse. Some of these essential duties include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean an assortment of different things. It can be as simple as your gas cap being loose or as unpredictable as engine knocking. If your check engine light is on in your 2020 Chevrolet Traverse, contact Coggin Chevrolet at the Avenues. Contact Coggin Chevrolet at the Avenues today! Our Chevrolet service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we advocate that you pull over and contact Coggin Chevrolet at the Avenues to help determine if your vehicle is safe to drive in or if we advocate a tow truck. Since each check engine code has its own level of severity, it is generally difficult to predict how many miles you can be safe in driving with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the proper code reading and diagnosis. The average cost for a check engine light diagnosis & testing is generally between $88 and $111. The good news, Coggin Chevrolet at the Avenues offers completely free multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.

2020 Chevrolet Traverse Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many common causes including something as simple as a loose gas cap. Other mostly common reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, or damaged spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Chevrolet Certified Technicians and the certified service protocol to isolate the root problem and entirely repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chevrolet issue was totally fixed.

Every 2020 Chevrolet Traverse was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its vital systems. The speedy sensors are continually detecting conditions while sending essential data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. Yet, unfortunately that is the limitation of the Check Engine Light – it won’t tell you what absolutely is wrong nor what to do about it. That’s where we come in; Coggin Chevrolet at the Avenues provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service professional.

What could cause the check engine light to come on in a 2020 Chevrolet Traverse?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Again, the check engine light could likewise be a warning of an essential problem that could cause serious damage to your engine and come with a hefty and pricey repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow typically means something less serious but a flashing check engine light reveals that your vehicle’s engine is in meaningful trouble and helpful service is necessary quickly. If your check engine light is flashing in your 2020 Chevrolet Traverse, we highly suggest not to drive the car and schedule Chevrolet service today. Below is a list of the most common reasons your check engine light can come on:

• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your 2020 Chevrolet Traverse if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the car from starting. If these issues sound familiar, bring your Traverse to Chevrolet and have our team of skilled certified mechanics assure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or utilizing OEM parts first place might cost a little bit more but could help you save substantially from having to get poor work and damage caused by poor installation work corrected.
• New Spark Plugs or Plug Wires are necessary for your 2020 Chevrolet Traverse. The spark plugs are the part of your engine that ignites the air/fuel mix in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience a evident poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more expensive repairs.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Chevrolet Traverse’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A broken catalytic converter is frequently caused by repeatedly neglected maintenance, which is why Coggin Chevrolet at the Avenues offers a free multi-point check with each Chevrolet service. If you have an issue with your catalytic converter and don't get it repaired, your 2020 Chevrolet Traverse will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other delicate problems from overheating.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more expeditiously and your car will be less efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A broken sensor can not only affect your miles per gallon, but it can cause meaningful damage to your catalytic converter and your 2020 Chevrolet Traverse's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the exactly correct mix of air and fuel that enters the cylinders in your engine. A broken O2 sensor can again cause a vehicle to fail an emissions test.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Chevrolet Traverse is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Chevrolet Traverse is having trouble starting, idling rough or has a sudden speedy change in the position of the throttle pedal, this could be a essential sign of a broken mass airflow sensor.
• Your 2020 Chevrolet Traverse has a vacuum leak. Each Chevrolet Traverse has a vacuum system that performs a wide variety of functions. The vacuum system again helps lower adverse emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme cold.
• One of the most common and frequent cause is that your 2020 Chevrolet Traverse gas cap is loose, broken or missing. The gas cap for your 2020 Chevrolet Traverse serves different purposes. It prevents perilous gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a broken fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more costly. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2020 Chevrolet Traverse, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• The battery is low or dead. The battery in your 2020 Chevrolet Traverse is each essential. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Chevrolet you drive, but check our current service coupons and specials.

2020 Chevrolet Traverse Check Engine Light Codes

The check engine light turning on can be quite intimidating, particularly to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, still known as the OBD (on-board computer diagnostic system) in your Traverse. There are hundreds of different codes that your check engine light can accurately represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you useful knowledge about your car and will still allow that important Check Engine Light to do what it is absolutely supposed to do: be your guide. Sadly, clear and helpful car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are still hundreds of possible reasons for the light, including:

• Ignition system faults
• Old Battery
• Bad Spark Plugs
• O2 Sensor
• Transmission issues
• Loose Gas Cap or Missing Gas Cap
• Emissions controls issues
• Computer output circuit issues
• Fuel and air metering systems problems

This is why it is crucial for someone who does not have a lot of predominant automotive knowledge to not assume what a code means. Call Coggin Chevrolet at the Avenues at 9045745317 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out immediately by a talented certified Chevrolet mechanic. If the engine light comes on due to a serious concern, you risk damaging your car further by not repairing the issue right away.

Is it safe to drive your 2020 Chevrolet Traverse with the check engine light on?

If the check engine light is flashing, this means that there is a serious issue and it is suggested to service your Chevrolet Traverse promptly. This question is not tremendously simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is usually indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. Call the experts at Coggin Chevrolet at the Avenues by dialing 9045745317 so you can describe the issues. Or reduce your speed and bring your 2020 Chevrolet to our certified mechanics as in the near future as conceivable.

Check Engine Light Service 2020 Chevrolet Traverse

What do you do when you’re driving along in your Chevrolet Traverse and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Chevrolet owners, your heart sinks exceptionally because you may have specifically idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, peaceful breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2020 Chevrolet Traverse checked promptly. Ignoring that warning could end up causing major, huge damage to costly engine components.

When your 2020 Chevrolet Traverse's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is ordinarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can instantly identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Chevrolet auto repair mechanics at Coggin Chevrolet at the Avenues. There are likewise a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the specifically correct issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2020 Chevrolet Traverse will normally shut itself off if the issue or code that caused it to turn on is fixed. For instance, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will quickly turn itself off. Also, if your catalytic converter is working accurately, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Chevrolet Traverse light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Chevrolet at the Avenues so the light and code can be double-checked and reset.